Changing The Operation Sound Volume (Vol. Settings) - Ricoh GR Digital II User Manual

Changing the Operation Sound
Volume (Vol. Settings)
You can change the operation sound volume.
Available Settings
(Mute)
(Small)
(Medium) *Default setting
(Large)
To change the operation sound volume, follow the steps below.
1
Display the setup menu.
• For the operating procedure, see P.156.
2
Press the " button to select [Vol. Settings] and press
the $ button.
3
Press the !" buttons to select
the desired setting.
5
4
Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
The level sensor sound is not emitted, even when [Level Setting] is set to [Disp + Snd]
or [Sound] and [Vol. Settings] is set to [
172
] (Mute) (GP.173).