Loading The Battery And Sd Memory Card - Ricoh GR Digital II User Manual

Loading the Battery and SD Memory Card

The rechargeable battery (DB-60) can be used to power this
camera. This battery is convenient because the battery power
lasts long and it can be used over and over again by recharging.
If the camera is already turned on, make sure it is turned off before
loading the battery and card.
1
Slide the release lever toward
OPEN to open the battery/card
cover.
2
Make sure the SD memory card
is facing the right way and then
push the card all the way in until
it clicks.
• The rechargeable battery may be
inserted first.
3
Insert the rechargeable
battery.
• Press the latch with the battery and
insert the battery all the way into the
battery compartment.
• When the rechargeable battery is
loaded in place, it is locked with the latch.
4
Close the battery/card cover and
slide the release lever in the
opposite direction of OPEN to
lock it in place.
1
2
1
2
31