Locking The Exposure (Ae Lock) - Ricoh GR Digital II User Manual

Locking the Exposure (AE Lock)

Assigning the Fn (Function) button to [AE Lock] (GP.164) and
then pressing the Fn button during shooting allows you to lock or
cancel the exposure.
1
Set [Function Button] to [AE Lock] on the setup menu.
• For the operating procedure, see P.164.
1
2
Check that the camera is ready to shoot.
3
Put the subject of your photo in the center of the screen
and press the Fn button.
• The exposure is locked and the AEL
mark, aperture value, and shutter
speed appear on the screen.
• Pressing the Fn button again cancels
the AE lock.
Note ----------------------------------------------------------------------------------------------
• The exposure continues to remain locked even after you shoot a picture.
• The AE lock does not work in manual exposure mode even if the Fn button is assigned
to [AE Lock]. When the Fn button is pressed, the value is automatically set closer to
the appropriate exposure (closer to the center of the exposure value indicator). This
is useful when, for example, you want to change/adjust the exposure value from closer
to the center of the exposure value indicator (the appropriate exposure).
74