Changing The Exposure Metering Modes (Exposure Metering) - Ricoh GR Digital II User Manual

Ricoh digital camera owner's manual model gr digital ii
Hide thumbs Also See for GR Digital II:
Table of Contents

Advertisement

Changing the Exposure Metering
Modes (Exposure Metering)
You can change the exposure metering modes (the range to use for
metering) used to determine the exposure value.
There are three exposure metering modes.
Exposure Metering Modes
1
Symbol
Mode
No symbol Multi
Center
Spot
1
Turn the mode dial to 5/P/A/M/SCENE.
2
Press the MENU/OK button.
• The shooting menu is displayed.
3
Press the " button to select [Exposure Metering] and
press the $ button.
4
Press the !" buttons to select
the desired setting.
5
Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
• If you select the setting [Center] or
[Spot], the symbol appears on the
screen.
98
Description
The entire shooting range is divided into 256 partitions, and each is
metered to determine the overall exposure value.
The entire image is metered, with emphasis on the center, to
determine the exposure value.
Use this when the brightness of the center and surroundings are different.
Only the center of the image is metered to determine the exposure value.
Use this setting when you want to use the brightness at the center.
This is useful if there is a marked difference in contrast or backlighting.

Advertisement

Table of Contents
loading

Table of Contents