Ricoh GR Digital II User Manual page 216

Problem
The picture is blurred.
The flash does not fire or
the flash cannot charge.
Even though the flash
fired, the picture is dark.
7
214
Cause
You moved the camera when
pressing the shutter release
button.
When shooting in a dark place
(such as indoors), the shutter
speed slows down and pictures
become easily blurred.
The flash is not open.
The flash cover is not fully raised. Do not press or cover the flash
The flash cannot be used in the
following cases:
• When auto blacket, white
balance bracket, or color
bracket is set
• In multi-shot mode
• In movie mode
The flash is set to flash off.
Battery is exhausted.
The distance to the subject is
greater than 3.0 m (9.8 ft).
The subject is dark.
The light intensity of the flash is
not appropriate.
The flash cover is not fully raised. Do not press or cover the flash
Solution
Hold the camera with your elbows
pressed against your body.
Use a tripod.
Use the flash.
Raise the ISO setting.
Slide the F (Flash) OPEN switch
down to open the flash.
cover.
To shoot with the flash, change
the settings or mode.
Open the flash. Use the F (Flash)
button to cancel flash off.
Charge the rechargeable battery
or use the AC adapter. Replace
the alkaline batteries with new
batteries.
Get closer to your subject and
shoot.
Adjust the light intensity of the
flash.
Adjust the light intensity of the
flash.
cover.
Refer to
P.36
P.44
P.126
P.44
P.44
P.44
P.110
P.112
P.114
P.99
P.129
P.44
P.30
P.31
P.225
P.44
P.109
P.109
P.44