Switching From Color To Black-And-White Or Black-And-White (Te) Mode (Color>B&W, Color>Te) - Ricoh GR Digital II User Manual

Switching from Color to Black-and-White or
Black-and-White (TE) Mode
(Color>B&W, Color>TE)
Assigning the Fn (Function) button to [Color>B&W] or [Color>TE]
(GP.164) and then pressing the Fn button with [Img Set] set to a
setting other than [B&W] or [B&W (TE)] allows you to switch from
[Color] to [B&W] or [B&W (TE)]. Pressing the Fn button again
1
returns to color mode.
1
Set [Function Button] to [Color>B&W] or [Color>TE] on
the setup menu.
• For the operating procedure, see P.164.
2
With the camera ready to shoot, press the Fn button.
• The setting switches to [B&W] or
[B&W (TE)] and an orange symbol is
displayed on the screen.
• Pressing the Fn button again returns
to color mode.
Caution------------------------------------------------------------------------------------------
When [Img Set] is set to [B&W] or [B&W (TE)] (GP.105, 106), pressing the Fn button
does not switch to color mode.
Note ----------------------------------------------------------------------------------------------
• Turning off the camera after switching to [B&W] or [B&W (TE)] returns the setting to
color mode.
• You can also use the shooting menu to make the color setting. (GP.105, 106)
76