Solving Network Printing Problems; General Problems - Ricoh AC20 User Manual

General Problems

Condition
System does not function
with some wrong values
entered by mistake while
configuring.
Not able to access from
SNMP Manager.
You cannot see any of
DHCP server, BOOTP
server or RARP server,
when you want to set IP
address to the machine.
You can not print using
TCP/IP protocol.
The name of printer is
displayed empty while
adding a port and the
printer doesn't function.
9.28 T
ROUBLESHOOTING

Solving Network Printing Problems

Possibly the parameters in the network card are
corrupted. Restart the system and set to factory
defaults. See "Restoring the Network Configuration" on
page A.8.
Try pinging from the same system on which SNMP
manager is running. If it does not succeed, there must
be a problem with network connectivity between the
manager and the machine. If ping succeeds, verify that
community names with sufficient permissions have been
used.
You should set IP address, Subnet Mask and Default
Gateway to the machine using Set IP.
1.Check whether TCP/IP protocol is installed in your PC.
2.Check whether your PC is on the same network with
the machine.
Assign IP Address by using the Set IP.
Suggested solutions