To Use Set Ip - Ricoh AC20 User Manual

5
Check Set IP and then click Next.
6
When the installation is completed, click Finish.

To Use Set IP

1
From the Start menu, select Type 103 in Programs, and
click Set IP.
2
Click to find printer on the local network, or click
and type the printer's MAC address.
N : To configure the MAC address, see the NETWORK PRINTER
OTE
CARD TEST PAGE. To Print the NETWORK PRINTER CARD TEST
PAGE, refer to "Printing a Network Configuration Page" on
page A.5.
3
Type IP address, Subnet Mask and Default Gateway, and
then click [Config].
4
If it is successfully is completed, the printer prints
NETWORK PRINTER CARD TEST PAGE.
G S 2.47
ETTING TARTED
2