Table of Contents
Advertisement
Maintaining Your Machine
If the exposure glass, platen cover or document feeder belt is dirty, you might
not be able to make copies as you want. Clean them if you find them dirty
Note
❒ Do not use chemical cleaner or organic solvent, such as thinner or benzene. If
they get into the machine or melt plastic parts, a failure might occur.
❒ Do not clean parts other than those specified in this manual. Such parts
should be cleaned by your service representative.
❒ Wipe the machine with a soft, damp cloth. Then wipe it with a dry cloth to
remove the water.
Exposure Glass
Trsr130e.eps
Platen Cover
Trsr140e.eps
TRSR130E
TRSR140E
Maintaining Your Machine
7
191
Advertisement
Table of Contents
