Ricoh 4506 Copy Reference Manual page 192

Changing the Machine's Settings
Menu
Photo Type(Auto
Text/Photo) (Photo)
Copy Reset Timer
Maximum Copy
Quantity
Tone: Original on
6
Platen
Front Side Margin
Adjust.
Back Side Margin Ad-
just.
180
Description
You can select the photo type (Press Print, Glossy Photo, or 2nd Gener-
ation) in Photo mode that is selected automatically just after the ma-
chine is turned on or when modes are cleared.
Note
❒ Default: Press Print
The machine returns to its initial condition automatically after your job
is finished. The time can be set from 10 to 990 seconds, or this function
can be turned off.
A
Select [On] or [Off] keys.
B
When you select [On], enter the time with the number keys. Then,
press the [#] key.
Note
❒ Default: On (60 seconds)
The maximum copy quantity can be set from 1 to 100.
Note
❒ Default: Off
The key tone sounds when you forgot to remove originals after copy-
ing.
Note
❒ Default: Off
❒ When the "Panel Tone" is set to Off, the beeper does not sound even
if the "Original Tone" is set to On.
You can adjust the front side margin direction and width that is select-
ed as a default in "Front Side Margin Adjust" mode. You can change
this setting.
• Metric Version: left/20mm - right/20mm in 1mm steps.
• Inch Version: left/0.8" - right/0.8" in 0.1" steps.
Note
❒ Default:
• Metric version: left/right 0mm
• Inch version: left/right 0"
You can adjust the back side margin direction and width that is select-
ed as a default in Back Side Margin Adjust. You can change this setting.
• Metric Version: left/20mm - right/20mm in 1mm steps.
• Inch Version: left/0.8" - right/0.8" in 0.1" steps.
Note
❒ Default:
• Metric version: left/right 0mm
• Inch version: left/right 0"