Table of Contents
Advertisement
What to Do if Something Goes Wrong
Condition
The machine cannot detect
the original size.
The machine instructs you
to check the original direc-
tion.
The machine instructs you
to check paper size.
The machine cannot sort
this size paper.
The machine cannot stack
5
this size paper.
You cannot enter the de-
sired copy set number.
The machine instructs you
to set the duplex tray.
The machine instructs you
to wait.
The panel display is off.
If you cannot correct the problem by taking the above actions, please contact
your service representative.
150
Action
Set custom size original on the exposure glass.
Input the both horizontal and vertical sizes of the custom original.
⇒ P.41 "Copying onto custom size paper with the bypass tray".
Select paper manually, not in Auto Paper Select mode.
Do not use Auto Reduce/Enlarge mode.
Set your originals.
Set the original in the same direction as the copy paper.
Select the proper paper size.
Select the proper paper size that can be used in Sort mode. ⇒ P.90
"Sort".
Select the proper paper size that can be used in Stack mode. ⇒
P.92 "Stack".
You can change the maximum copy quantity that you can make at
a time. ⇒ P.179 "General Features".
Reset the duplex tray correctly. ⇒ P.4 "Guide To Components".
Wait for the machine to warm-up.
Press the {Energy Saver} key to cancel Energy Saver mode.
Turn on the operation switch.
Adjust the Screen Contrast. ⇒ P.7 "Operation Panel".
Advertisement
Table of Contents
