Table of Contents
Advertisement
Copying
❒ The margin width default is as follows. You can change this default setting
with the user tools. ⇒ P.179 "General Features".
Metric Version
Inch Version
2
❒ If you set too wide a margin, areas you do not want to delete might be erased.
Reference
Regarding functions that cannot be used together with this function, ⇒ P.97
"Combination Chart".
A
Press the [Shift/Book] key.
B
Press the [Margin Adjustment] key.
copy43.tif
C
Enter the margins for the front side and back side of the copy paper.
Note
❒ To change the value entered, press the [Clear] key and enter a new value.
❒ To make a left margin, press the [→ → → → ] key until the number displayed reach-
es the required setting.
❒ To make a right margin, press the [← ← ← ← ] key until the number displayed
reaches the required setting.
D
Press the [OK] key.
E
Set your originals, then press the { { { { Start} } } } key.
78
• Front: 0mm Left
• Back: 0mm Right
• Front: 0" Left
• Back: 0" Right
Advertisement
Table of Contents
