Table of Contents
Advertisement
Menu
Auto Tray Switching
3 Side Full Bleed
Bypass Tray Custom
Size
Description
If you load paper of the same size in two or more trays, the machine au-
tomatically shifts another tray when the tray in use runs out of paper.
You can set or cancel this setting.
Note
❒ Default: Off
❒ This function is not available in Area Editing Mode.
When this mode is off, narrow margins on all 4 sides of the original are
not copied.
1: 2±2mm/0.08"±0.08"
2: 2±2mm/-1.5mm. 0.08" + 0.08"/-0.06
3: 2±2mm, 0.08"±0.08"
4: 4±2mm, 0.2"±0.08"
When you turn it on, margins 1, 2 and 3 are copied.
Note
❒ Default: Off
❒ You cannot cancel the leading edge margin (margin 4).
You can register non-standard size paper when you make copies with
the bypass tray.
A
Press the [Change] key.
B
Enter the horizontal size with the number keys, then press the [#] key.
C
Enter the vertical size with the number keys, then press the [#] key.
D
Press the [OK] key.
Note
❒ Adjustment value:
• Metric version:
Vertical: 100 - 305mm
Horizontal: 140 - 457mm
• Inch version:
Vertical: 3.9" - 12.0"
Horizontal: 5.5" - 18.0"
❒ Default: Custm 1
User Tools
6
177
Advertisement
Table of Contents
