Ricoh 4506 Copy Reference Manual page 196

Changing the Machine's Settings
Menu
Inkjet Output Mode
Setting
Duplex/ADF/Sorter
Menu
Duplex Tray Auto
Clear
6
SADF Auto Reset
Timer
ADF Thin paper
ADF Mixed Sizes
ADF Auto Paper Se-
lect
184
Description
Specifies the type of image adjustment for Inkjet Output mode.
• 1 – emphasize yellow
• 2 – emphasize red and yellow
• 3 – emphasize red and blue
If you want to emphasis yellow, select 1.
If you want to emphasis red and yellow, select 2.
If you want to emphasis red and blue, select 3.
Note
❒ Default: 1
Description
When making two-sided copies from one-sided originals, if the last
original is an odd page, the last copy will be automatically delivered
with the reverse side blank. You can cancel this setting.
Note
❒ Default: On
When you set one original at a time in the document feeder, the Auto
Feed indicator lights for a selected time after an original is fed to show
that the document feeder is ready for another original. The time can be
set from 1 second to 99 seconds.
Note
❒ Default: 5 seconds
Use when changing the type of originals to be fed. Select this function
to avoid damaging thin originals (40 - 52g/m
ument feeder.
Note
❒ Default: Off
By default, you cannot set originals of different sizes at one time in the
document feeder. You can cancel this setting.
Note
❒ Default: Off
❒ If you select [On], the copying speed will be reduced.
❒ When setting different length originals, all originals must be flush
with the back fence of the document feeder.
❒ Smaller originals might be skewed a little.
By default, Auto Paper Select is selected when you set originals in the
document feeder. You can cancel this setting.
Note
❒ Default: On
2
, 11-14 lb) set in the doc-