Copying From The Bypass Tray - Ricoh aficio 1013F Operating Instructions Manual

Copying from the Bypass Tray

Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, postcards, envelopes,
and copy paper that cannot be set in
the paper tray.
Note
❒ If you do not use standard size
copy paper, you should enter ver-
tical and horizontal dimensions.
The sizes that you can enter are as
follows:
Metric version • Vertical: 90 –
• Horizontal: 140 –
Inch version • Vertical: 3.5" – 8.5"
• Horizontal: 5.5" –
Reference
For details about paper capacity in
the bypass tray, see p.12 "Copy Pa-
per".
A A A A
Open the bypass tray.
216mm
356 mm
14"
Copying from the Bypass Tray
B B B B
Push up the paper guide release
lever.
1.
Paper guide release lever
C C C C
Gently insert the copy paper face
d o w n a n d a d j u s t t h e p a p e r
guides.
1.
Horizontal size
2.
Vertical size
3.
Extender
4.
Paper guides
Important
❒ If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
2
27