Attaching The Wind Tunnel - Intel SE7501CW2 Installation & Integration

Attaching the Wind Tunnel

1. Spread the tabs outward slightly (1a). Lower the wind
tunnel assembly onto the retention mechanism (1b).
2. The tabs on the fan assembly (2a) slide into slots (2b) on
the inner side of t
3. The tabs on fan assembly (3a) connect to the outside
surface of the retent
4. Attach the fa n power cable to the corresponding server
board CPU fan connecto
Correct assembly sh
When installing only one processor, there
over the second processor location. Use the wind tunnel assembly over a CPU socket only
when a CPU is installed.
Install the rest of the internal peripherals of your server now
hard disk drives. See "Making Required Connections to
ser ver board connection points.
Intel Server Board SE7501CW2 Installation and Integration Guide
he retention mechanism.
ion mechanism (3b).
r.
ould look like this:
is no need to install the wind tunnel assembly
, including any floppy, CD, and
the Server Board" below for the
15