Destination To Save; How To Start And Close The Sc Setting Tool; How To Connect A Pc To The Satellite Compass - Furuno SC-33 Operator's Manual

Drop cable
Prepare the drop cable (type: M12-05BFFM-010/020/060) between the CAN-USB converter and
NMEA2000 backbone. Attach a D-SUB (9 pin) connector to the loose end of the drop cable, re-
ferring to the following table.
NC
CAN_
H
NC
1.3

Destination to Save

Download the SC setting tool from FURUNO Tech-Net in advance and save the executable file of
the SC setting tool (file name: "SC_Setting_Tool.exe") in the following location (folder). The SC
setting tool does not require installation.
• For 32 bit OS: C:\Program Files\Furuno\SC_Setting_Tool
• For 64 bit OS: C:\Program Files(x86)\Furuno\SC_Setting_Tool
Note: Create a shortcut for the executable file as required.
1.4

How to Start and Close the SC Setting Tool

1.4.1

How to connect a PC to the SATELLITE COMPASS

1. Make the connections shown below.
Power supply
12 VDC
NC
CAN_L
CAN_GND/NC
NC
NC
SATELLITE COMPASS
NMEA2000 backbone
2
1. OPERATIONAL OVERVIEW
Pin No. Signal
1 NC
2 CAN_L
3 CAN_GND/NC
4 NC
5 NC
6 NC
7 CAN_H
8 NC
9 NC
Note: Red and black wires of the
M12-05BFFM-010/020/060 cable are
not used.
TM
PC
Color
-
Blue
Drain
-
-
-
White
-
-
™
USB
CAN-USB
Converter