2. HOW TO SETUP THE MENU
2.4
[PGN Setup] Tab
You can enable/disable PGN output from the SATELLITE COMPASS
rate on the [PGN Setup] tab.
How to set the transmission rate
All PGNs that the connected SATELLITE COMPASS
tab. Unavailable PGNs are grayed out and the setting cannot be adjusted.
When you change the transmission rate, click the drop down list for the PGN to be set and select
the appropriate value. If you want to disable the PGN, select [Off]. The setting range changes ac-
cording to the PGN. For the setting range of each PGN, see "MENU TREE" on page AP-1.
2.5
[Simple Diagnostic] Tab
You can perform the simple diagnostic test on the [Simple Diagnostic] tab.
™
can output are shown on the [PGN Setup]
9
™
and adjust transmission