Sky Plot] Tab - Furuno SC-33 Operator's Manual

Sc setting tool. satellite compass
Hide thumbs Also See for SC-33:
Table of Contents

Advertisement

Simple diagnostic test
Click the [Stat Diagnostic] button on the [Simple Diagnostic] tab to start the simple diagnostic test.
The simple diagnostic test checks the performance of the SATELLITE COMPASS
table shows the test result of the simple diagnostic test:
Test Result
ROM/RAM
ROM
Internal RAM
TEST/RESULT
GYRO
ACC
G1
G2
G3
ENV
MAG
ANT
MT
ST
2.6

[Sky Plot] Tab

The [Sky Plot] tab shows the available satellites and their elevation .
Note: The following PGNs should be output from the SATELLITE COMPASS
mation on the [Sky Plot] tab.
• PGN: 127250 (Vessel Heading)
• PGN: 130845 (Multi Sats in View Extended)
• PGN: 130846 (Motion Sensor Status Extended)
1
2
3
ROM test result (OK or NG).
Internal RAM test result (OK or NG).
Gyro sensor test result (OK or NG).
From left: X-axis, Y-axis, Z-axis test result
Acceleration sensor test result (OK or NG).
From left: X-axis, Y-axis, Z-axis test result
Memory test result for GNSS core 1 to 3 (OK or NG) and version
information.
Air pressure sensor test result (OK or NG).
Magnetic sensor test result (OK or NG).
The software version of the SATELLITE COMPASS
ware released date (yyyy/mm/dd/hh/mm).
Operating time of the MAIN board (unit: hour).
Operating time of the SUB_IMU board (unit: hour).
4 4
5 5
10
2. HOW TO SETUP THE MENU
Remarks
to show the infor-
. The following
and soft-
6 6

Advertisement

Table of Contents
loading

Table of Contents