S8 Modules; Using A Blank Module; Using A Res Scan Data Card Module - ResMed Flow Generator S8 Elite System Illustration Manual

S8 M
ODULES
Note: Do not remove modules while power is connected to the S8 Elite.
Your will have one of two modules fitted to the back: a blank module or a
S8 E
LITE
Data Card module.
R S
ES CAN
U B M
SING A LANK
Please refer to the illustrations in section F of the illustration sheet.
The blank module is a protective cover on your
remove or attach the module, for example to use another module.
To remove the blank module, pull it off the back of the
communications port (F-1).
To attach the blank module, push the blank module onto the data communications
port, until the module clicks into place (F-2).
Note: To protect the data communications port, always ensure there is a module
attached to the back of the device.
U R S
SING A ES CAN
Please refer to the illustrations in section G of the illustration sheet.
The Data Card module is an accessory to the
R S
ES CAN
Card with the Data Card module to collect data and update settings in the
The module and card give your clinician convenient access to data about your
treatment, and can provide you with new device settings from your clinician without
your having to leave home.
A
TTACHING THE
To attach the Data Card module, push it onto the data communications port at the
back of your
S8 E
R
EMOVING THE
To remove the Data Card module, pull it off the back of the
Note: To protect the data communications port, always ensure there is a module
attached to the device.
U D
SING THE ATA
Please refer to the illustrations in section H of the illustration sheet.
If your clinician needs to review your treatment, they will ask you to use the Data Card
to copy data from your
be provided in a convenient mailback envelope.
Data that is copied to a Data Card is still stored and available on the
It takes up to 30 seconds to copy data onto the Data Card.
1 I
NSERT THE
Switch on the
•
ODULE
D C M
ATA ARD ODULE
M
ODULE
until it clicks into place (G-1).
LITE
M
ODULE
C C
ARD TO OLLECT DATA
, and to return the card to them. The Data Card will
S8 E
LITE
D C
ATA ARD
and wait until you see the standby (RAMP) screen.
S8 E
LITE
. At times, you may wish to
S8 E
LITE
to show the data
S8 E
LITE
. Use a
S8 E
LITE
(G-2).
S8 E
LITE
S8 E
Data
R S
ES CAN
.
S8 E
LITE
.
LITE
23
S8 M
ODULES