This guide is intended for multi-patient re-use of the AirFit
instructions. The processor is responsible for ensuring that reprocessing is completed in accordance with ResMed's validated procedures.
Mask component
1
• Cushion
• Frame / frame magnetic clips
• Elbow body / elbow clip / elbow ring
• Headgear
2
• Soft wraps
3
1
May not be available in all regions. For full details regarding the correct use of this mask, please refer to the User Guide. For a list of available replacement parts, check the Product Guide on ResMed.com.
Headgear includes headgear magnetic clips.
2
Not intended for multi-patient re-use.
3
A
1
2
B
3
4
C
™
F30i full face mask in a sleep lab, clinic or hospital. If you use the mask as a single user in the home, refer to the User Guide for cleaning
Page 1
– May not be available in all regions. For full details regarding the correct use of this mask, please refer to the User Guide. For a list of available replacement parts, check the Product Guide on ResMed.com. Headgear includes headgear magnetic clips.
Page 2
• Firmly slide the frame magnetic clip from the frame connector. Repeat on the other side. (Fig c.) 1. Make a solution of a mild alkaline, anionic detergent and water as per manufacturer’s instructions. ResMed has validated the following: • Alconox 1% concentration (10 g/L) 86-131°F (30-55°C)
Page 3
ResMed Pty Ltd See ResMed.com for other ResMed locations worldwide. AirFit is a trademark of the ResMed family of companies. Alconox is a trademark of Alconox Inc. For patent and other intellectual property information, see 1 Elizabeth Macarthur Drive Resmed.com/ip.