Download
Share
Print this page
ResMed AirFit F30i User Manual
  1. Manuals
  2. Brands
  3. ResMed Manuals
  4. Respiratory Product
  5. AirFit F30i
  6. User manual

ResMed AirFit F30i User Manual

Hide thumbs Also See for AirFit F30i:

Advertisement

Quick Links

Download this manual
English
Français
Español
Português
USER GUIDE
Device setting
Full face

Advertisement

loading

Related Manuals for ResMed AirFit F30i

Summary of Contents for ResMed AirFit F30i

  • Page 1 English Français Español Português USER GUIDE Device setting Full face...

  • Page 2: Intended Use

    Upper headgear strap Intended Use The AirFit F30i mask is intended to be used by patients weighing more than 66 lb (30 kg) who have been prescribed non-invasive positive airway pressure (PAP) therapy such as CPAP or bi-level therapy. The mask is intended for single patient re-use in the home and multi-patient re-use in the hospital/institutional environment.
  • Page 3 Contraindications Use of masks with magnetic components is contraindicated in patients with the following pre-existing conditions: • a metallic hemostatic clip implanted in your head to repair an aneurysm • metallic splinters in one or both eyes. Before using your mask Remove all packaging and inspect each mask component for visible deterioration.
  • Page 4 3. Twist and pull both magnetic clips away from the frame connectors. 4. Place the cushion under your nose and ensure it sits comfortably against your face. With the ResMed logo on the headgear facing up, pull the headgear and frame over your head.
  • Page 5 Disassembling your mask for cleaning If your mask is connected to a device, disconnect the device air tubing from the mask elbow. 1. Undo the fastening tabs on the upper headgear straps and pull from the frame. Keep the magnetic clips attached to the lower headgear straps.
  • Page 6 Repeat on the other side. 2. Attach the elbow to the top of the frame until it clicks. 3. With the ResMed logo facing outwards and up, insert the upper headgear straps into the frame from the inside and fold the fastening tabs over to secure.
  • Page 7 WARNING • The mask must be used under qualified supervision for patients who are unable to remove the mask by themselves. The mask may not be suitable for those prone to aspiration. • The mask should not be used unless the device is turned on. Once the mask is fitted, ensure the device is blowing air to reduce risk of rebreathing exhaled air.

  • Page 8: Technical Specifications

    Mask setting options: For AirSense, AirCurve or S9: Select 'Full Face'. Compatible devices: For a full list of compatible devices for this mask, see the Mask/Device Compatibility List at ResMed.com/downloads/masks. SmartStop may not operate effectively when using this mask with some CPAP or bi-level devices.

  • Page 9: Reprocessing The Mask Between Patients

    Cushion size - medium Cushion size - small wide Cushion size - wide Caution, consult accompanying documents. Prescription only (In the US, Federal law restricts these devices to sale by or on the order of a physician.) See symbols glossary at ResMed.com/symbols.

  • Page 10: Limited Warranty

    It is not transferable. If the product fails under conditions of normal use, ResMed will repair or replace, at its option, the defective product or any of its components. This limited warranty does not cover: a) any damage caused as a result of improper use, abuse, modification or alteration of the product;...