How To Set Up Lan Data Output - Furuno SC-130 Operator's Manual

2. OPERATION
12. Select [SENTENCES], then press the
ENT key. The sentence setup window
appears.
13. Press the arrow keys to move the se-
lection cursor and highlight the sen-
tence to set up, then press the ENT
key. The cycle section of the sentence
is now highlighted.
14. Press
output cycle, then press the ENT key.
15. To set up other sentences, repeat steps 13 and 14 as necessary.
Note: The sentence load rate indicates the workload required to process the sen-
tences. When setting sentences, observe the load rate carefully and ensure it
does not reach or exceed 100%.
16. To apply the changes, select [ENTER], at the bottom of the sentence list, then
press the ENT key.
To cancel any changes to the sentences, select [CANCEL], then press the ENT
key.
17. Close the [MENU].
2.15.2

How to set up LAN data output

When connecting the SC-70/SC-130 to a shipboard LAN network, perform the follow-
ing procedure to set up data output.
1. Open the [MENU].
2. Select [I/O], then press the ENT key.
3. Select [NETWORK], then press the ENT key.
4. For non-IMO vessels, select [TALKER], then press the ENT key.
An options pop up window appears.
For IMO-type vessels, go to step 6.
5. Select the appropriate talker, then press the ENT key. The available options are
listed in the table at step 9 of section 2.15.1.
Note: For IMO-types, the talkers are fixed as follows.
6. Referring to steps 12 through 15 of section 2.15.1, set up the sentences as appro-
priate.
7. Select [IP ADDRESS/PORT], then press the ENT key. A numerical pop up win-
dow appears.
Use the following IP Address and Port combinations to show the log data in the
[ETHERNET] log:
8. Set the IP address and port as appropriate, select [ENTER], then press the ENT
key.
9. Close the [MENU].
2-28
or to adjust the sentence
THD, ROTI device mode
GPS device mode
IP Address
239.192.000.001 60001
239.192.000.003 60003
Currently
selected port and
port's baud rate
Sentences
and their
settings
: Fixed at [HE].
: Fixed at [GP].
Port IP Address
239.192.000.004
239.192.000.008
Sentence
load rate
Port
60004
60008