Operation; Controls Overview - Furuno SC-130 Operator's Manual

2.

OPERATION

2.1

Controls Overview

No. Key
1 BRILL
2 DISP
3 MENU ESC
4 ACK
5 LIST
6 ENT
7 Cursorpad
GP-D3D CAUTION
05 : 16 ' 35 21 / DEC / 15
TOKYO
24º40.1234'N
104º45.5678'E
1 2
BRILL DISP
ACK
LIST
4
5
• Opens the [BRILL SETTING] window.
• With the BRILL SETTING window open, adjusts the screen brilliance.
• With the menu open: Close the menu and return to the last used display
mode's main screen.
• Without the menu open: Change the display mode.
• Open the main menu.
• Close the menu and return to the last used screen.
• Close settings pop up window and return to the last used menu.
• Acknowledge an individual alert and close the alert pop up message.
• Show the [LIST] display.
• Cycle through the [LIST] display.
• Open a menu item.
• Confirm selected setting in pop up window.
• Switch between graphic and main display for the current device mode.
• From the SPD main screen: Long press to reset track (for non-IMO types
only).
• Navigate menus.
button: Go back one layer in the menu.
button: Open the selected menu item.
button: Move selection cursor to the item above the current selection.
button: Move selection cursor to the item below the current selection.
• Adjust settings.
button: Move cursor to the left.
button: Move cursor to the right.
button: Increase the value of the selected item.
button: Decrease the value of the selected item.
• With [INTEGRITY] screen shown: scroll through the displayed data when
more than one screen is available.
9 . 6 567/199m
14 : 16 ' 35 21 / DEC / 15
059
.1
6
.2
3
MENU
ESC
7
ENT
6
Description
2-1