Furuno SC-130 Operator's Manual page 84

3. MAINTENANCE, TROUBLESHOOTING
Error message
"NO USB!"
"ERROR DETECTED IN
SETTINGS TRANSFER!
RESTORING PREVIOUS
SETTINGS."
"NOT ENOUGH SPACE
ON USB."
"NO FILE FOUND ON
USB."
"OTHER BACKUP PRO-
CESS IS RUNNING."
6. When the import/export is complete the progress window is replaced with a pop
up window displaying the message "IMPORT COMPLETE" or "EXPORT COM-
PLETE".
7. Press the ENT key. The last used display screen appears.
8. Open the [MENU].
9. Select [SYSTEM], then press the ENT key.
10. Select [USB FLASH DRIVE], then press the ENT key.
11. Select [UNMOUNT], then press the ENT key.
12. Close the [MENU].
How to remove the USB Flash Memory
To remove the USB Flash Memory, open the MENU, then select [SYSTEM]
FLASH DRIVE]
CAN REMOVE THE USB SAFELY" appears. Remove the USB Flash Memory.
3-4
Meaning
No USB flash memory is con-
nected to this unit.
Data transfer to/from the USB
flash memory was interrupt-
ed/stopped.
This unit will restore the set-
tings used prior to import.
USB flash memory does not
have enough space to save
the settings.
There is no settings file saved
on the connected USB.
Import/export was attempted
while a separate backup (or
log) is in progress.
[UNMOUNT]. When the process is completed, the message "YOU
Recommended action
Press the MENU ESC key to close
the pop up.
Check the connection. If a flash mem-
ory is connected, the USB connector/
cable may be damaged, contact your
dealer.
Press the ACK key to close the pop
up and start restoring the settings.
Delete unnecessary files from the
USB or use a USB with sufficient
memory.
Connect the correct USB.
Wait for the other backup/log to com-
plete, then try again.
[USB