Main Menu - Furuno SC-130 Operator's Manual

1.6.1

Main menu

How to access the menu
The menu is locked with a password. Press the MENU ESC key to show the password
input window (shown below-right).
If this is the first time the unit has been
turned on, the password is not set at de-
fault. Press the ENT key to access the
menu. It is recommended to set a new
password in this case.
If the unit has a previously set password,
input the password, then press the ENT
key to access the menu.
Note 1: Password input is required to access the menu each time the unit is turned
off, then on again.
Note 2: The menu closes automatically if no keys are pressed within one minute.
How to change/set the password
1. Open the [MENU].
2. Select [SYSTEM], then press the ENT key.
3. Select [PASSWORD], then press the ENT key.
4. Select [CHANGE], then press the ENT key. An input window appears.
The currently selected input box is in-
dicated with a small arrow to the left-
side of the input box, as shown in the
figure to the right.
To set the password for the first time,
press the ENT key to select the [NEW
PASSWORD] input box, then skip to
step 6.
5. Enter the current user password. If
the password is incorrect, the input window is reset to blank. If the password is
correct, the arrow indication moves to the [NEW PASSWORD] input box.
6. Enter a new password, then press the ENT key. The arrow indication moves to
the [NEW PASSWORD (CONFIRM)] input box.
7. Enter the new password again, then press the ENT key. If the passwords match,
the [CHANGE PASSWORD] input window disappears.
If the passwords do not match, the input boxes for [NEW PASSWORD] and [NEW
PASSWORD (CONFIRM)] are reset and the arrow indication returns to the [NEW
PASSWORD] box. Repeat the procedure from step 6.
8. Close the [MENU].
1. INSTALLATION
1-25