How To Turn The Power On/Off - Furuno SC-130 Operator's Manual

2. OPERATION
2.2

How to Turn the Power On/Off

The power is turned on or off from the Junction Box (SC-701). Turn the SC-701 on/off
to turn the SC-702 on/off.
The startup screen appears for five seconds, then the system starts a diagnostic test.
The diagnostic test takes approximately 30 seconds to complete. After the diagnostic
test is complete, the main screen appears. You can also bypass the diagnostic test
and show the main screen at any time during the test, my pressing any key.
Note 1: If the startup process has one or more errors, the message "COMMUNICA-
TION ERROR" appears at the bottom of the diagnostic test screen.
Note 2: The display may appear "sluggish" if the ambient temperature is low.
Note 3: Viewable angles may vary between daylight and nighttime.
*: The [DEVICE MODE] is set at installation. To change this setting, consult your local
dealer.
2-2
Startup/initialize screen.
Shown for approximately
five seconds.
Self-test screen.
Shown for approximately 30 seconds.
Main screen.
For IMO type vessels: The preset
[DEVICE MODE]* screen appears.
For non-IMO vessels: The last used
screen appears.