Turning The Power On/Off; Panel Illumination, Display Contrast - Furuno SC-120 Operator's Manual

3. OPERATION
3.2

Turning the Power On/Off

Use the power switch on the processor unit to turn the power on and off.
The display starts up with the last-used display.
Note 1: Turn on external equipment AFTER the SC-120 is showing reliable
heading data, to prevent heading output error.
Note 2: The display flashes when backup heading data is used.
3.3

Panel Illumination, Display Contrast

1. Press the [DIM] key.
Dialog box for adjustment of panel illumination, display contrast
2. Press ▲ or ▼ on the Omnipad to adjust panel illumination.
3. Press ◄ or ► on the Omnipad to adjust display contrast.
4. Press the [ENT] key.
3-2
Processor unit
4
45
POWER
Switch