Writing A Memory Channel; D Selecting And Writing A Channel - Icom IC-R30 Advanced Manual

4
MEMORY OPERATION

■ Writing a memory channel

D Selecting and Writing a channel

The channel is written to the selected channel.
Example: Writing 145.000 MHz to channel 16 in group 00.
1. Push [VFO/MR] to select the VFO mode.
2. Rotate [DIAL] to set the frequency and receive mode and so on.
3. Push [MW].
4. Select "Write to Selected CH."
(Rotate [DIAL] to select it, and then push [ENTER].)
5. Select the channel.
• The selected Memory channel number blinks.
6. Push [MW].
7. Select "Yes."
• Beeps sound and the memory channel is written.
TIP: Selecting an option on the QUICK menu screen
In Step 5 above, push [QUICK], then select an option,
as shown below.
NAME:
SKIP:
Group Select:
<<Write>>:
<<Insert Write>>: Inserts the channel above
Enters to the Memory Name editing mode.
Displays the Skip setting screen.
Displays the Memory Group list.
Writes the memory
the selected memory channel.
A blank channel
4-5