Table of Contents
Advertisement
GAGGIA VELASCA
5.2
Steam Out
Not mandatory, but if necessary, before executing the steam out procedure, descale the machine
taking care to remouve the Aquaclean filter from the appliance.
In case the filter on the machine is active (or it's in the machine) provide the consumer with a new
one.
Introduction
This document describes the Steam-Out process that is executed at the end of the production line
for the CA. GAGGIA VELASCA. It totally empties the heater from any residual water and resets
some parameters to the factory default values.
Steam Out
To access Steam Out the user must press both LONG COFFEE and SPECIAL DRINKS (MENU for AMF)
buttons while connecting the CA to the power supply.
When lit the CA will start the procedure, turning PINK the display back-
light and showing "ON" on the screen-During the process, the 2-ways
Electrovalve will stay open, causing steam to be discharged from the
spout (hot water wand for AMF version).
Warning!
If the dreg drawer is not correctly inserted or the side door open, the CA
shows a RED screen with the advice "CLOSE DOOR & DREGS"
At the end of the process, the display will turn WHITE and show the
"COMPLETE" word on the screen. The Electrovalve, also, will be closed
and the CA will be ready to be manually turned off.
The Steam-Out resets these parameters to their factory values:
OTC version product quantities:
Short Coffee (Espresso)
Long Coffee
Coffee Intense
Coffee in cappuccino
Milk in cappuccino
Froth Milk brewing time
AMF version product quantities:
Short Coffee (Espresso)
Long Coffee
Longevity Filter setup:
Filter Startup Quantity
Filter Counter
Filter Remaining Autonomy
Filter Installation proposal at start
CA Settings:
Pre-infusion
Introduction
Introduction
This document describes the Steam-Out process that is executed at the end of the production line for the CA
Introduction
INTELIA EVO 2 OTC/AMF. It totally empties the heater from any residual water and resets some parameters
to the factory default values.
This document describes the Steam-Out process that is executed at the end of the production line for the CA
This document describes the Steam-Out process that is executed at the end of the production line for the CA
INTELIA EVO 2 OTC/AMF. It totally empties the heater from any residual water and resets some parameters
INTELIA EVO 2 OTC/AMF. It totally empties the heater from any residual water and resets some parameters
1 Steam Out
to the factory default values.
to the factory default values.
1 Steam Out
To access Steam Out the user must press both LONG COFFEE and SPECIAL DRINKS (MENU for AMF)
1 Steam Out
buttons while connecting the CA to the power supply.
To access Steam Out the user must press both LONG COFFEE and SPECIAL DRINKS (MENU for AMF)
To access Steam Out the user must press both LONG COFFEE and SPECIAL DRINKS (MENU for AMF)
When lit the CA will start the procedure, turning PINK the display
buttons while connecting the CA to the power supply.
buttons while connecting the CA to the power supply.
backlight and showing "ON" on the screen-
During the process, the 2-ways Electrovalve will stay open, causing
When lit the CA will start the procedure, turning PINK the display
When lit the CA will start the procedure, turning PINK the display
steam to be discharged from the spout (hot water wand for AMF
backlight and showing "ON" on the screen-
backlight and showing "ON" on the screen-
version).
During the process, the 2-ways Electrovalve will stay open, causing
During the process, the 2-ways Electrovalve will stay open, causing
steam to be discharged from the spout (hot water wand for AMF
steam to be discharged from the spout (hot water wand for AMF
version).
version).
Warning!
If the dreg drawer is not correctly inserted or the side door open, the
CA shows a RED screen with the advice "CLOSE DOOR & DREGS"
Warning!
Warning!
If the dreg drawer is not correctly inserted or the side door open, the
If the dreg drawer is not correctly inserted or the side door open, the
CA shows a RED screen with the advice "CLOSE DOOR & DREGS"
CA shows a RED screen with the advice "CLOSE DOOR & DREGS"
At the end of the process, the display will turn WHITE and show the
"COMPLETE" word on the screen. The Electrovalve, also, will be
closed and the CA will be ready to be manually turned off.
At the end of the process, the display will turn WHITE and show the
At the end of the process, the display will turn WHITE and show the
"COMPLETE" word on the screen. The Electrovalve, also, will be
"COMPLETE" word on the screen. The Electrovalve, also, will be
closed and the CA will be ready to be manually turned off.
closed and the CA will be ready to be manually turned off.
impulses = 137
impulses = 330
impulses = 265 (brewed within two mill-brew cycles)
impulses = 165
seconds = 34
seconds = 34
impulses = 137
impulses = 330
03
G. Divella
5000 impulses
revNum
Editor
03
G. Divella
0/8
03
G. Divella
revNum
Editor
0
revNum
Editor
ON
Seconds = 2,5
Steam Out Intelia EVO 2 OTC/AMF
Steam Out Intelia EVO 2 OTC/AMF
Steam Out Intelia EVO 2 OTC/AMF
Verified By
Approved By
Verified By
Approved By
Verified By
Approved By
05 SERVICE MODE
Filename
Intelia_EVO2_Stea
Filename
m_Out_V03.doc
Filename
Intelia_EVO2_Stea
Intelia_EVO2_Stea
m_Out_V03.doc
m_Out_V03.doc
02/07/2015
2/3
SaveDate
P/PP
02/07/2015
2/3
02/07/2015
2/3
SaveDate
P/PP
SaveDate
P/PP
7/8
- Quick Links:
- Disassembly
Hide quick links:
Advertisement
Table of Contents
