Saeco GAGGIA VELASCA CMF-OTC Service Manual page 34

GAGGIA VELASCA
Pressing STEAM button (Press CAPPUCCINO for OTC version)
The CA switches to page 2 (INPUTS)
1.3 Page 2 (INPUTS)
Initial condition (having removed all the components)
The H2O value must turn from "N" to "Y"
ERRORS occur if:
If the H2O value doesn't change check the capacitive sensor and the re-
lated wiring (JP23).
The DREG value must turn from "N" to "Y"
ERRORS occur if:
If the DREG value doesn't change check the dreg drawer microswitch and
the related wiring (JP16).
Close the Side Door (having the dreg drawer already inserted)
The DOOR value must turn from "N" to "Y"
ERRORS occur if:
If the DOOR value doesn't change check the side door microswitch and
the related wiring (JP14) and verify that the dreg drawer is correctly in-
serted.
The BU-P value must turn from "N" to "Y"
ERRORS occur if:
If the BU-P value doesn't change check the BU presence microswitch and
the related wiring (JP16).
PINK
Pressing button N°7 turns the STANDBY LED on.
To test button N°4 it must be pressed just one time because it
causes the CA to navigate to the next page
ERRORS occur if:
"ON" word does not appear or stays fixed on screen. In this case it's
necessary to check the communication flat cable connected
between the keyboard and the CPU-Power board. Should not, on
the other hand, change the display color, check the JP5 cable.
In case two or more buttons are pressed at the same time the
display shows the expression "TWO BTN!" This could be a useful
The CA switches to page 2 (INPUTS)
warning if the keyboard is not working properly
ERRORS occur if:
"ON" word does not appear or stays fixed on screen. In this case it's
necessary to check the communication flat cable connected
between the keyboard and the CPU-Power board. Should not, on
the other hand, change the display color, check the JP5 cable.
1.3 Page 2 (INPUTS)
The CA switches to page 2 (INPUTS)
5.0 G Divella
Initial condition (having removed all the components)
revNum Author
1.3 Page 2 (INPUTS)
Initial condition (having removed all the components)
1.3 Page 2 (INPUTS)
Initial condition (having removed all the components)
Insert the tank full of water
The H2O value must turn from "N" to "Y"
The H2O value must turn from "N" to "Y"
5.0 G Divella
revNum Author
The H2O value must turn from "N" to "Y"
ERRORS occur if:
If the H2O value doesn't change check the capacitive sensor and the
related wiring (JP23).
ERRORS occur if:
If the H2O value doesn't change check the capacitive sensor and the
The DREG value must turn from "N" to "Y"
related wiring (JP23).
Insert the Dreg Drawer
ERRORS occur if:
If the H2O value doesn't change check the capacitive sensor and the
The DREG value must turn from "N" to "Y" related wiring (JP23).
The DREG value must turn from "N" to "Y"
ERRORS occur if:
If the DREG value doesn't change check the dreg drawer
microswitch and the related wiring (JP16).
ERRORS occur if:
Close the Side Door (having the dreg drawer already inserted)
If the DREG value doesn't change check the dreg drawer
The DOOR value must turn from "N" to "Y"
microswitch and the related wiring (JP16).
ERRORS occur if:
If the DREG value doesn't change check the dreg drawer Close the Side Door (having the dreg drawer already inserted)
microswitch and the related wiring (JP16). The DOOR value must turn from "N" to "Y"
Close the Side Door (having the dreg drawer already inserted)
The DOOR value must turn from "N" to "Y"
ERRORS occur if:
If the DOOR value doesn't change check the side door microswitch
and the related wiring (JP14) and verify that the dreg drawer is
correctly inserted.
ERRORS occur if:
If the DOOR value doesn't change check the side door microswitch
and the related wiring (JP14) and verify that the dreg drawer is
correctly inserted.
ERRORS occur if:
If the DOOR value doesn't change check the side door microswitch
and the related wiring (JP14) and verify that the dreg drawer is
correctly inserted.
5.0 G Divella
Insert the Brewing Unit
revNum Author
The BU-P value must turn from "N" to "Y"
5.0 G Divella
revNum Author
5.0 G Divella
revNum Author
ERRORS occur if:
If the BU-P value doesn't change check the BU presence
microswitch and the related wiring (JP16).
Pressing STEAM button
Test Mode INTELIA EVO V2 AMF
Test Mode INTELIA EVO V2 AMF
Pressing STEAM button
Test Mode INTELIA EVO V2 AMF
Verified Approved
Insert the tank full of water
Insert the tank full of water
Verified Approved
Insert the tank full of water
Insert the Dreg Drawer
Insert the Dreg Drawer
Insert the Dreg Drawer
Test Mode INTELIA EVO V2 AMF
Verified Approved
Insert the Brewing Unit
Verified Approved
Verified Approved
05 SERVICE MODE
Filename
Intelia_EVO2_AMF_TestMode_V05
Filename
Intelia_EVO2_AMF_TestMode_V05
Filename
Intelia_EVO2_AMF_TestMode_V05
12/06/2015 4/12
SaveDate P/PP
12/06/2015 4/12
SaveDate P/PP
Filename
Intelia_EVO2_AMF_TestMode_V05
12/06/2015 5/12
SaveDate P/PP
12/06/2015 5/12
SaveDate P/PP
12/06/2015 5/12
SaveDate P/PP
3/8