Regency Gas Fireplace P42-LP4 Owners & Installation Manual page 2

Regency gas fireplace owners & installation manual
Hide thumbs Also See for Gas Fireplace P42-LP4:
Table of Contents

Advertisement

Congratulations!
You are the owner of a state-of-the-art Gas Fireplace by FIREPLACE PRODUCTS INTERNATIONAL. The
P42 is a hand crafted appliance and has been designed to provide you with all the warmth and charm of
a wood fi replace at the fl ick of a switch. The model P42 has been approved by Warnock Hersey for both
safety and effi ciency. As it also bears our own mark, it promises to provide you with economy, comfort and
security for many trouble free years to follow. Please take a moment now to acquaint yourself with these
instructions and the many features of your Regency
INFORMATION FOR MOBILE/MANUFACTURED HOMES AFTER FIRST SALE
®
This Regency
product has been tested and listed by Warnock Hersey as a Vented Gas Fireplace Heater to the following standards:
UL307B-1995, CAN/CGA-2.17-M91, ANSI Z21.88b-2003/CSA 2.33b-2003.
This Direct Vent System Appliance must be installed in accordance with the manufacturer's installation instructions and the Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280, or the current Standard of Fire Safety Criteria for Manufactured Home Installations,
Sites, and Communities ANSI/NFPA 501A, and with CAN/CSA Z240-MH Mobile Home Standard in Canada.
This appliance installation must comply with the manufacturer's installation instructions and local codes, if any. In the absence of local codes follow
the current National Fuel Gas Code, ANSI Z223.1 and the current National Electrical Code ANSI/NFPA 70 in the U.S.A., and the current CAN/CGA
B149 Gas Installation Code and the current Canadian Electrical Code CSA C22.1 in Canada.
This Regency
®
Mobile/Manufactured Home Listed
appliance comes factory equipped with a means to
secure the unit.
This Regency
®
Mobile/Manufactured Home listed
appliance comes equipped with a dedicated #8 ground
lug to which an 18 gauge copper wire from the steel
chassis ground must be attached.
This appliance may be installed in an aftermarket
permanently located, manufactured (mobile) home,
where not prohibited by local codes.
This appliance is only use with the type of gas indicated
on the rating plate. This appliance is not convertible for
use with other gases, unless a certifi ed kit is used.
2
To the New Owner:
®
Fireplace.
Regency
®
P42-4 Zero Clearance Direct Vent Gas Fireplace

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P42-ng4

Table of Contents