INSTALLATION
The P42 is approved for a 23 ft. (7.0m) vertical, with a maximum 12 ft (3.7m) horizontal offset
o
using two 90
elbows (two 45
Propane and Natural Gas, as per the diagram below.
•
No Vent restrictor is required.
•
Vent must be supported at offsets
Note: Regency
®
Direct Vent System (Flex) is only approved for horizontal terminations.
18
o
o
elbows equal one 90
elbow) with rigid pipe vent systems for
Diagram 3
The P42 is approved for a 37 ft. (11.3m) straight
vertical, with rigid pipe vent systems for Propane
and Natural Gas, as per the diagram below.
•
Vent restrictor #6 must be used
Regency
®
P42-4 Zero Clearance Direct Vent Gas Fireplace
Diagram 4