Siemens SINAMICS G130 Engineering Manual page 394

SINAMICS S120 Cabinet Modules
Engineering Information
Active Line Modules + Active Interface Modules
Active Infeeds must be regarded as requiring two separate auxiliary voltage supplies, i.e. one for the Active Interface
Module (AIM) and one for the Active Line Module (ALM).
The AIM requires the following voltages:
24 V DC: Control electronics
230 V AC: Cabinet ventilation, control voltage of precharging contactors depending on frame size
The ALM requires the following voltages:
24 V DC: Control electronics
400 V resp. 690 V AC: Power unit fans
Active Interface Modules and Active Line Modules are delivered due to the required power connections as one unit.
For this reason, the auxiliary voltage connections of the AIM are already made to the auxiliary voltage supply system
of the ALM in the delivery state. Fuse protection down-circuit of the auxiliary voltage supply system is provided in the
Cabinet Modules.
The power requirement in the table below is based on the combination of Active Interface Module and Active Line
Module.
Order No. Frame
size
Supply voltage 380 V – 480 V 3AC (DC link voltage 570 V – 720 V)
6SL3730-7TE32-1BA3 FX+FI
6SL3730-7TE32-6BA3 FX+FI
6SL3730-7TE33-8BA3 GX+GI
6SL3730-7TE35-0BA3 GX+GI
6SL3730-7TE36-1BA3 HX+HI
6SL3730-7TE38-4BA3 HX+HI
6SL3730-7TE41-0BA3 JX+JI
6SL3730-7TE41-0BC3 JX+JI
6SL3730-7TE41-4BA3 JX+JI
6SL3730-7TE41-4BC3 JX+JI
Supply voltage 500 V – 690 V 3AC (DC link voltage 750 V – 1035 V)
6SL3730-7TG35-8BA3 HX+HI
6SL3730-7TG37-4BA3 JX+JI
6SL3730-7TG37-4BC3 JX+JI
6SL3730-7TG41-0BA3 JX+JI
6SL3730-7TG41-0BC3 JX+JI
6SL3730-7TG41-3BA3 JX+JI
6SL3730-7TG41-3BC3 JX+JI
1)
Power requirement of control electronics, auxiliary power supply for fans.
SINAMICS Engineering Manual – November 2015
394/528
Ó Siemens AG
Rated rectifier/ Rated rectifier/
regenerative regenerative
power at 400 V current
or 690 V
I
rated
[kW] [A]
132 210
160 260
235 380
300 490
380 605
500 840
630 985
630 985
900 1405
900 1405
630 575
800 735
800 735
1100 1025
1100 1025
1400 1270
1400 1270
1)
Current requirement
24 V 230 V AC
DC
50 Hz 60 Hz
[A] [A]
1.27 0.6
1.27 0.6
1.52 1.2
1.52 1.2
1.57 4.6
1.57 4.6
1.67 4.9
1.67 4.9
1.67 4.9
1.67 4.9
1.57 4.6
1.67 4.9
1.67 4.9
1.87 4.9
1.87 4.9
1.87 4.9
1.87 4.9
400 V or 690V AC
50 Hz 60 Hz
[A] [A] [A]
0.9 0.63 0.9
0.9 1.13 1.6
1.8 1.8 2.7
1.8 1.8 2.7
6.8 3.6 5.4
6.8 3.6 5.4
7.3 5.4 8.0
7.3 5.4 8.0
7.3 5.4 8.0
7.3 5.4 8.0
6.8 2.1 3.1
7.3 3.1 4.6
7.3 3.1 4.6
7.3 3.1 4.6
7.3 3.1 4.6
7.3 3.1 4.6
7.3 3.1 4.6