Siemens SINAMICS G130 Engineering Manual page 252

General Engineering Information for SINAMICS
Engineering Information
SINAMICS S120
SINAMICS S120 Chassis Power Units
Liquid-cooled
Equipment Manual
SINAMICS S120 Cabinet Modules
Air-cooled
Equipment Manual
SINAMICS S120 Cabinet Modules
Liquid-cooled
Equipment Manual
SINAMICS S120 Cabinet Modules
AOP30 Operator Panel (Option K08)
Operating Instructions
SINAMICS S120 Booksize / SIMODRIVE
Cabinet Integration
System Manual
SINAMICS S120 Drive Functions
Function Manual
SINAMICS S120 Safety Integrated
Function Manual
SINAMICS G130 / G150 / S120 Chassis / S120
Cabinet Modules / S150 Safety Integrated
Function Manual
SINAMICS S120 Getting Started with the
STARTER commissioning tool
SINAMICS S120 Commissioning
Commissioning Manual
SINAMICS S120 / S150 (formerly SINAMICS S)
List Manual
SINAMICS Engineering Manual – November 2015
252/528
Ó Siemens AG
Description of liquid-cooled SINAMICS S120 Chassis power
units:
- Description of units and connection instructions,
- Information about cabinet design and EMC,
- Servicing and maintenance information.
Description of air-cooled SINAMICS S120
Cabinet Modules:
- Description of units / options and connection instructions,
- Servicing and maintenance information.
Description of liquid-cooled SINAMICS S120
Cabinet Modules:
- Description of units / options and connection instructions,
- Servicing and maintenance information.
Description of the advanced operator panel AOP30
(Advanced Operator Panel 30)
Description of the procedure for integrating built-in units into
cabinets, with particular focus on cooling and EMC
requirements.
Description of the fundamental principles and operating modes
of the SINAMICS system:
- Description of the drive functions in the firmware,
- Integration into the drive system,
- Explanation of PROFIdrive, PROFIBUS and PROFINET IO,
- Commissioning of Safety Integrated,
- List of differences between firmware versions.
Informationen about Safety Integrated on SINAMICS S120 units
- System features,
- Basic Functions and Extended Functions;
- Commissioning information,
- Parameters and function diagrams,
- Acceptance test and acceptance certificate.
Description of basic and extended safety functions incl.
- Option K82
- STO and SS1
Description of the commissioning process with the STARTER
commissioning tool.
Information about commissioning SINAMICS S120 units using
BOP20 and STARTER (not AOP30):
- Description of commissioning sequence,
- Information about diagnostics.
Complete list of parameters and function diagrams, plus
complete list of alarm and fault messages for the SINAMICS
S120 system and SINAMICS S150 converters