Unpairing Your Shaver And Iphone; Cleaning And Maintenance - Philips S7980 Manual

22
English
Shave settings

Unpairing your shaver and iPhone

Cleaning and maintenance

Note: Make sure you rinse all foam or shaving
gel off the shaver.
The app has a feature that allows you to
personalize your shave settings. Go to the Usage
Tracker and change the shaving settings. You can
adjust the settings and choose between three
settings depending on your personal shaving
needs: extra sensitive (xs), sensitive (s) and normal
(n).
Pairing allows a connection between 1 shaver and 1
iPhone. To remove this connection (e.g. when you
have a new iPhone 6, 6 Plus, 6S or 6S Plus
equipped with iOS9 or higher), follow the steps
below:
1 Remove pairing from the app: open the app ->
Go to the menu in the app -> Select 'App
settings' and press 'Remove pairing from app'.
2 Unpair the shaver: press and hold the on/off
button on the handle for approx. 10 seconds to
remove the bond between shaver and app.
Note: The unpairing of the shaver is successful
when the Bluetooth and notification symbol
flash simultaneously (approx. 4 seconds).
3 Unpair your iPhone: choose Settings -> General
-> Bluetooth -> Select the device by pressing (i)
-> and press 'forget devices'.
If the shaver and the app are paired, the cleaning
reminder on the shaver lights up after each shave
as an extra reminder to tell you to clean the
shaver.