Using The Shaver; Using The Skinanalyst Sensor - Philips S7980 Manual

Using the shaver

Using the SkinAnalyst sensor

2
1
6 In the app, the pop-up message 'press pair'
appears. When your iPhone and the shaver
have been paired successfully, the Bluetooth
symbol flashes briefly and then goes out. If this
does not happen, please see 'Troubleshooting'.
7 Once the shaver and the app have been paired,
the shaver automatically selects the right
personal settings depending on the attachment
you have clicked on. During shaving or
cleansing, you can open the app to see the
settings you are using and the duration of the
shaving or cleansing session.
Note: When you use the shaver, keep your
iPhone and shaver within transmission range
(no more than 5 meters from each other, in the
same room).
1 Open the app before measuring your skin.
2 If you have an iPhone case, first remove the
case from your iPhone.
3 Pull the clamp of the SkinAnalyst sensor
outwards and gently place your iPhone into the
holder with its camera pointing towards the
opening on the inside of the holder. Be careful
when you attach or remove the SkinAnalyst
sensor to prevent scratches on your iPhone.
Note: The SkinAnalyst sensor can only be used
on iPhone 6, iPhone 6 Plus, iPhone 6S and
iPhone 6S Plus equipped with iOS9 or higher.
15
English