Using The Shaver - Philips Wet&Dry S7000 Series User Manual

Hide thumbs Also See for Wet&Dry S7000 Series:
Table of Contents

Advertisement

Available languages

Available languages

18
English
Unpair the shaver and smartphone

Using the shaver

3 Switch on the shaver.
4 Open the app and follow the instructions to
start the pairing process.
5 When paired, the shaver and app will connect
automatically when you open the app. Simply
keep the app open and Bluetooth on.
Pairing allows a connection between 1 shaver and 1
smartphone. To remove this connection (e.g. when
you have a new smartphone), use the following
steps:
1 Unpair the shaver: press and hold the on/off
button on the handle for approx. 10 seconds to
remove the bond between shaver and app.
Note: The unpairing of the shaver is successful
when the notification symbol lights up 4 times
briefly.
2 Unpair your smartphone: go to 'Settings' on
your smartphone and select Bluetooth. Then
select ' Shaver S79xx' and press 'forget' or
'unpair'.
Note: The unpairing procedure may vary per
smartphone. Please check your smartphone
manual for more information.
Always check the shaver and all accessories
before use. Do not use the shaver or any
accessory if it is damaged, as this may cause
injury. Always replace a damaged part with one of
the original type.
Note: This shaver is waterproof. It is suitable for
use in the bath or shower and for cleaning under
the tap. For safety reasons, the shaver can only be
used without cord.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wet&dry s7970/26

Table of Contents