Connecting With The Shaver - Philips S7980 Manual

16
English

Connecting with the shaver

S7920
4 Insert the jack plug of the SkinAnalyst sensor
into your iPhone.
5 Remove the protection cap from the
SkinAnalyst sensor.
Note: Above instructions are also shown in the
app.
The SkinAnalyst sensor only works if you
remove the case of your iPhone.
6 Follow the instructions in the app to measure
your skin.
Note: Keep the SkinAnalyst sensor placed on
the skin during measurement to avoid flashing
into your eyes.
-Do not look into the sensor before and after
skin measurement.
-When you take a picture of the skin, please
position the sensor flat onto your skin so to
ensure it can take a clear picture of your skin.
1 Make sure Bluetooth on your iPhone is
switched on.
2 Open the app on your iPhone.
3 When paired, the shaver and the app connect
automatically. You can now start with your daily
skincare routine.
Note: Make sure you have a good internet
connection to fully benefit from the app.
4 Synchronize the shaving and cleansing data on
the shaver and the app (see 'Synchronizing your
shaves and cleansing treatments').