4-36 LIU board
1. Before you remove the LIU board, you should
remove:
– Rear cover (see page 4-9)
– Shield Engine ass'y (see page 4-19)
2. Remove three screws and three connectors from
the LIU board, then remove the board from the
main frame.
4-37 Main board
1. Before you remove the main board, you should
remove:
– Rear cover (see page 4-9)
– Shield Engine ass'y (see page 4-19)
2. Remove four screws and all the connectors (9)
from the main board, then remove the board.
Samsung Electronics
Disassembly and Reassembly
4-21