Disassembly and Reassembly
4-34 SMPS board
1. Before you remove the SMPS board, you should
remove:
– Rear cover (see page 4-9)
– Shield Engine ass'y (see page 4-19)
2. Remove four screws and three connectors, then
remove the SMPS board from the main frame.
4-35 Speaker
1. Before you remove the speaker, you should
remove:
– Rear cover (see page 4-9)
– Shield Engine ass'y (see page 4-19)
– SMPS board (see above)
2. Remove one connector that connects the speaker
to the main board and two screws securing the
speaker, then remove the speaker.
4-20
Samsung Electronics