Disassembly and Reassembly
4-26 Solenoid
1. Before you remove the solenoid, you should
remove:
– All covers (see page 4-3, 4-9)
2. Unplug one connector from the engine board
and remove one screw, then remove the solenoid.
4-27 HVPS board
1. Before you remove the HVPS board, you should
remove:
– All covers (see page 4-3, 4-9)
2. Remove three screws and one connector from the
HVPS board, then remove the board.
Note: when reassembling, make sure that the
terminal is five.
4-16
Samsung Electronics