THOMSON SpeedTouch 605 User Manual page 128

Chapter 5
Expert Configuration
Ping tests and results
Traceroute
118
To start/stop a ping test:
1
Select the ping test entry.
2
Click:
Activate to start the ping test.
Deactivate a ping test that is currently running.
To view the results of the ping test:
1
Select the ping test entry, if needed.
2
Click Result.
To overview a history of ping tests:
1
Select the ping test entry.
2
Click History.
The Traceroute table provides a list of configured traceroute test entries.
By default no traceroute tests are configured. To add a traceroute test see
delete a traceroute test below.
Per traceroute test entry following information is shown in the table:
an intuitive Test name of the traceroute Test
the traceroute test entry Owner
the traceroute Target Address (host or IP address)
the traceroute test Status, being either:
Stopped
In Progress
Select a traceroute test entry to:
Modify traceroute test
Perform a traceroute test and view test results and history (see
and results).
Delete the entry (see Add/delete a traceroute
properties.
test).
Add/
traceroute tests
E-DOC-CTC-20051017-0151 v1.0