Lean Page; Figure 5-4 Lean Page (182 Shown) - Garmin G1000 Reference Manual

SECTION 5 – MFD
Engine Indication System Pages
Pressing the ENGINE softkey makes available the
LEAN and SYSTEM softkeys which in turn access the
Lean Page and the System Page, respectively.

LEAN Page

Pressing the LEAN softkey displays the Lean Page
with the following information:
MAN IN – Displays the engine manifold pressure in
inches of mercury (Hg).
TACHOMETER – Displays the current propeller speed
in revolutions per minute.
FFLOW GPH – Displays the fuel flow in gallons per
hour.
TIT °F (turbocharged) – Displays the turbine inlet
temperature in degrees Fahrenheit.
EGT °F – Displays the exhaust gas temperature for each
cylinder in degrees Fahrenheit.
CHT °F – Displays the cylinder head temperature for
each cylinder in degrees Fahrenheit.
FUEL QTY – Displays the amount of fuel remaining in
the left and right fuel tanks in gallons.
Pressing the CYL SLCT softkey allows EGT and CHT
information to be displayed for a particular cylinder.
NOTE: The cylinder select and lean functions
are described in detail in the G1000 Engine
Indication System Pilot's Guide.
80 Garmin G1000 Cockpit Reference Guide for Cessna Nav III
Manifold Pressure
Gauge
Fuel Flow
Indicator
(GPH )

Figure 5-4 LEAN Page (182 Shown)

Tachometer
Exhaust Gas
Temperature
Cylinder Head
Temperature