Stormscope Page Operations; Figure 6-5 Stormscope Page Options Menu - Garmin G1000 Reference Manual

SECTION 6 – MFD
OPTIONAL INTERFACES

Stormscope Page Operations

The following Stormscope Page operations can be per-
formed using softkeys or page menu options:
• Change display range
• Change the lightning mode between cell and
strike
• Change the viewing mode between 360° and 120°
ARC
• Remove Stormscope lightning data
To change the display range:
To change the display range on the Stormscope Page,
turn the joystick clockwise to zoom out or turn the
joystick counter-clockwise to zoom in. Display ranges are
25 nm, (25 and 50) nm, (50 and 100) nm, and (100 and
200) nm.
To change the Stormscope lightning mode
between 'cell' and 'strike':
1. Select the Stormscope Page.
2. Press the MODE softkey. The CELL and STRIKE
softkeys are displayed. Press the CELL softkey
to display 'CELL' data or press the STRIKE soft-
key to display 'STRIKE' data. 'CELL' or 'STRIKE'
is displayed in the mode box located in the
upper left corner of the Stormscope Page OR:
Press the MENU key. The page menu is
3.
displayed with 'Strike Mode' or 'Cell Mode'
highlighted. Press the ENT key on the desired
selection.
116 Garmin G1000 Cockpit Reference Guide for Cessna Nav III
To change the viewing mode between 360˚
and 120˚:
1. Select the Stormscope Page.
Press the VIEW softkey. The 360 and ARC soft-
2.
keys are displayed. Press the 360 softkey to
display a 360˚ viewing are or press the ARC
softkey to display a 120˚ viewing area OR:
Press the MENU key. The page menu is
3.
displayed. Turn the small or large FMS knob
to select the desired view. Press the ENT key
on the desired selection.
To remove Stormscope lightning data from
the display:
1. Press the CLEAR softkey to remove all Storm-
scope lightning data from the display OR: Press
the MENU key. Select 'Clear Lightning Data'
and press the ENT key.

Figure 6-5 Stormscope Page Options Menu