Garmin G1000 Reference Manual page 108

SECTION 5 – MFD
The following sections provide instructions on entering
a flight plan, navigating a flight plan, and editing a flight
plan. Complete Flight Plan Page operations are described
in the G1000 Multi Function Display Pilot' s Guide.
To enter a Flight Plan:
1. Press the FPL key and turn the small FMS knob
to display the Flight Plan Catalog (second
page).
Press the MENU key to display the Flight Plan
2.
Catalog Options.
3. Turn the large FMS knob to highlight 'Create
New Flight Plan' and press the ENT key.
4. A blank flight plan page appears for the first
empty storage location. Use the small and
large FMS knobs to enter the identifier of the
departure waypoint and press the ENT key.
5. Repeat step 4 above to enter the identifier for
each additional flight plan waypoint.
6. Once all waypoints have been entered, press
the small FMS knob to return to the Flight Plan
Catalog.
To navigate a Flight Plan:
1. Press the FPL key and turn the small FMS knob
to display the Flight Plan Catalog.
Press the small FMS knob to activate the
2.
cursor.
3. Turn the large FMS knob to highlight the desired
flight plan and press the MENU key to display
the Flight Plan Catalog Options.
4. Turn the large FMS knob to highlight
'Activate Flight Plan' and press the ENT key.
Press the ENT key again to confirm.
92 Garmin G1000 Cockpit Reference Guide for Cessna Nav III
To stop navigating a Flight Plan:
1. Press the FPL key. The Active Flight Plan Page
appears.
Press the MENU key to display the Active Flight
2.
Plan Options.
3. Turn the large FMS knob to highlight 'Delete
Flight Plan' and press the ENT key.
Press the ENT key again to confirm.
4.
To edit a Flight Plan:
1. Press the FPL key and turn the small FMS knob
to display the Flight Plan Catalog.
Press the small FMS knob to activate the
2.
cursor.
3. Turn the large FMS knob to highlight the desired
flight plan and press the ENT key.
4. To add a waypoint to the flight plan: Turn the
large FMS knob to select the point where you
wish to add the new waypoint. (If an existing
waypoint is highlighted, the new waypoint will
be placed directly in front of this waypoint.)
Use the small and large FMS knobs to enter
the identifier of the new waypoint and press
the ENT key.
5. To delete a waypoint from the flight plan: Turn
the large FMS knob to select the waypoint you
wish to delete and press the CLR key to display
a 'remove waypoint?' confirmation window.
With 'OK' highlighted, press the ENT key to
remove the waypoint.
6. Once all changes have been made, press the
small FMS knob to return to the Flight Plan
Catalog.