Set Mode - Icom IP501H Instruction Manual

5
OPTIONAL PRODUCTS
■ Pairing the IP501H with the BC-218 or VS-3 (continued)
3. Search for Bluetooth devices
1. While holding down [FUNC], turn ON the power.
• Enters the Set mode.
2. Release [FUNC] when "SET" is displayed.
3. Push [FUNC] several times to select "Search Bluetooth Device."
4. Push [Call history].
• "Searching..." is displayed
• When Bluetooth devices are found, their device name and BD address
are displayed on the screen.
5. Push [▲]/[▼] to select a device, then push to [Call history].
• When the pairing has succeed, "Connect" is displayed.
• To retry the search, push [▲]/[▼] to select "Search," then push [Call history].
6. Push [CLR/LOCK].
• Exits the Set mode.
[Call history]
[履歴]キー
[電源/音量]ツマミ
[PWR/VOL]
[FUNC]キー
[FUNC]
[CLR/LOCK]
[CLR/LOCK]キー
[▲]/[▼]
[▲]/[▼]キー
5-14
SET
LOG
– – –
SET
Search Bluetooth
Search
SET
Search Bluetooth
Searching···
SET
ICOM BT-000:00-00
SET
Connect