Recording - Icom IP501H Instruction Manual

3
ADVANCED OPERATION

■ Recording

The Recording function records the audio of received calls.
The recording duration of a single file is up to 1 minute. The oldest file will be automatically overwritten when the 5th call is
recorded.
L You can play the recorded audio only when the Playback function is assigned to [Option] by your dealer.
LAs the default setting, you can record only Individual calls. You can change this setting in the Set mode (p. 4-7).
LOnly the call-to party's voice is recorded.
LThe recorded audio data cannot be exported.
NOTE: When removing the battery pack
The recorded audio is stored in memory on Power OFF. Do not remove the battery pack until "POWER OFF..." is
disappeared. Otherwise the recorded audio may be lost.
1. Setting the Recording function enable
1. While holding down [FUNC], turn ON the power.
• Enter the Set mode.
2. Release [FUNC] when "SET" is displayed.
3. Push [FUNC] or [Address] several times to select "Recording."
4. Push [▲]/[▼] to select "Enable."
5. Push [CLR/LOCK].
• Exits the Set mode.
[FUNC]
[CLR/LOCK]
[▲]/[▼]
3-7
SET
LOG
– – –
SET

Recording

Enable