User Set Mode - Icom IC-F43TR Instruction Manual

6
D DTMF receiving and transmitting
—Optional UT-108 is required—
If the transceiver has [Send DTMF] assigned to it, a
DTMF encode channel is displayed when pushed, and as-
signed DTMF encode channels can be selected via [UP] or
[DOWN].
Receiving:
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the conventional system channel, in sequence.
w Push [Select call] to mute the channel. ("
e
leased. ("
Transmitting:
q Push [UP] or [DOWN], or rotate [ROTARY SELECTOR]
to select the conventional system channel, in sequence.
w Push [Send DTMF]— a DTMF encode channel appears.
e Push [UP] or [DOWN] to select the desired DTMF en-
code channel.
r Push [PTT] to transmit the selected DTMF code in the
selected DTMF channel.
[P0] to cancel the DTMF transmission.
15

User set mode

If the transceiver has [User Set Mode] assigned to it, you
ences and operating style.
Entering the user set mode:
q Push and hold [User Set Mode] to enter user set mode.
Push [User Set Mode] momentarily to select the item.
Then push [UP] or [DOWN] to set the desired level/condi-
tion.
-
Available set mode functions:
w Push and hold [User Set Mode] to exit user set mode.
displayed.
-