Icom IP501H Instruction Manual page 33

4
SET MODE
■ Setting item list (continued)
The shaded items (■ ■) are also displayed in the Basic Set mode.
LItems or default values may differ according to a presetting. Ask your dealer for details.
Item
Out of Range Notice Tone
Stop Sidetone in Out of Range
Sidetone
Sidetone Volume
VOX
VOX Threshold
Echo Canceller
Noise Canceller
BackLight
Contrast
Mic Gain
Notification Beep Volume
Key-Touch Beep
Key-Touch Beep Volume
Receive Buffer Type
Tx Inhibit
PTT Lock
PTT Call at Stand-by
Description
Sounds the out-of-area warning
beep. The beep also sounds when
the transceiver reenters the service
area.
( Out-of-area: "Pipi," Reenters ： "Popo")
Mutes the sidetone when the trans-
ceiver is out-of-area.
The Sidetone function outputs the
transmitting audio to a headset that is
connected to the transceiver.
When this item is set to "Enable," the
Echo Canceller function is automati-
cally set to "Disable."
Sets the Side tone volume.
Automatically switches between
receive and transmit by detecting
your voice.
Sets the VOX gain level.
L Higher values make the VOX function
more sensitive to your voice.
Sets the Echo Cancelling function.
( commonly used for an earphone
MIC and headset)
When the "SideTone" item is set to
"Enable," this item is fixed to "Disable."
Sets the Noise Cancelling function.
( commonly used for an IP501H, ear-
phone MIC and headset)
Sets the backlight operating function.
Sets the screen contrast.
Sets the microphone sensitivity.
L Higher values make the microphone
more sensitive to your voice.
Sets the notification beep level.
Sets the Key-touch beep.
Sets the Key-touch beep level.
Sets the Jitter buffer size.
L Jitter buffer reduces audio
interruptions.
Inhibits transmission.
Select "Enable" to lock all the con-
trols except [PWR/VOL].
L Transmission is aslo inhibited while
using an external microphone, and
the VOX function.
Inhibits transmission by the internal
PTT.
Displays the call-to party (Call type)
on the standby screen.
Option/range
Disable or Enable
Disable or Enable
Disable or Enable
0 ~ 32
Disable, earphone-micro-
phone or headset
0% ~ 100%
Disable or Enable
Disable or Enable
Auto, OFF or ON
1 (lowest) ~ 16 (highest)
－12 dB (lowest) ~ 12 dB
(highest) (in 3 dB step)
0 ~ 32
Disable or Enable
0 ~ 32
Dynamic,
40 ~ 480 milliseconds
(in 40 milliseconds step)
Disable or Enable
Disable or Enable
Disable or Enable
4-5
Default
Disable
Disable
Disable
10
Disable
40%
Enable
Enable
Auto
8
0 dB
10
Enable
10
Dynamic
Disable
Disable
Enable